Maximator gas boosters are an excellent alternative to high pressure stationary type compressors. These boosters offer a compact, lightweight design that requires no electrical power or lubrication, thereby providing a more flexible and efficient source for delivering high pressure gas.
Maximator gas boosters will compress gases such as nitrogen and argon up to 21,750 psi, while oxygen can be compressed up to 5,000 psi using special seals and cleaning procedures. A wide variety of other gases can be compressed including hydrogen, natural gas, ethylene, nitrous oxide, neon, carbon dioxide, carbon monoxide and breathing air. Consult MAXPRO for special seals, venting, or cleaning requirements for these gases.
In applications where high output pressures are required and the gas supply pressure is low, Maximator gas boosters can be operated in series. MAXPRO supplies these booster combinations in 2, 3 or 4 stage arrangements as complete packages. To achieve higher gas flows, two or more boosters can work in parallel as a unit. Consult MAXPRO for more information on these special applications.
Features
Pressures to 21,750 psi for most gases and 5,000 psi for oxygen
Easy to install and operate
Compact, lightweight design
Single or double acting and two stage models
Double air head available in single and two stage boosters
No electrical power required
Requires no lubrication
Boosters are contaminant free
Units can be operated in series or parallel
Variety of pressure and compression ratios available
Applications
Low pressure gas reclaim from storage bottles
Oxygen boosting
Gas pressure and leak testing
Charging of accumulators
Boosting gas pressures from nitrogen or Oxygen generators
Nitrogen injection for molding machines
Breathing air systems for scuba and fire department tanks
Leak detection systems
Low pressure autoclaving
Typical Gases - air, nitrogen, helium, oxygen,carbon dioxide, nitrous oxide, neon, argon, hydrogen, carbon monoxide, methane, ethylene and natural gas
MAXPRO offers five gas boosters in the single acting - single stage configuration.These booster models include the DLE2-1, DLE5-1, DLE15-1, DLE30-1 and DLE75-1. Single stage – single acting boosters are the smallest and lightest of the Maximator family, yet capable of output pressures up to 10,000 psi.
Double acting – single stage gas boosters provide twice the delivery flows of single acting boosters at a more constant output. Double acting - single stage models include DLE2, DLE5, DLE15, DLE30 and DLE75.
MAXPRO offers six models in single air head, double acting – two stage configuration.These boosters include the DLE2-5, DLE5-15, DLE5-30, DLE15-30, DLE15-75 and DLE30-75. These boosters are ideal for low gas supply pressures such as salvaging bottled gas or boosting pressures from a nitrogen generator.
For the greatest combination of pressure and compression ratios the double acting– two stage – double air head models are ideal. There are four double air head – two stage boosters, DLE5-30-2, DLE15-30-2, DLE15-75-2 and DLE30-75-2. These boosters provide maximum flow in low air drive and gas supply pressure conditions.
For high pressure applications or where air drive pressure is low MAXPRO offers three double acting – single stage boosters with a double air head. These models include the DLE15-2, DLE30-2 and DLE75-2.
For the greatest combination of pressure and compression ratios the double acting– two stage – double air head models are ideal. There are four double air head – two stage boosters, DLE5-30-2, DLE15-30-2, DLE15-75-2 and DLE30-75-2. These boosters provide maximum flow in low air drive and gas supply pressure conditions.
For high pressure applications or where air drive pressure is low MAXPRO offers three double acting – single stage boosters with a double air head. These models include the DLE15-2, DLE30-2 and DLE75-2.
MAXPRO gas booster systems provide a compact, portable source for increasing gas pressures. These air driven booster systems are shipped assembled and fully tested, ready for turn-key installation. As with standard boosters, the gas booster systems require no electrical power, providing safe and economical operation.
Gas booster systems are capable of compressing most gases including nitrogen, argon, helium and hydrogen up to 20,000 psi. Systems featuring special seals and cleaning can pressurize oxygen to 5,000 psi. All MAXPRO systems for use with hazardous gases are modified to ensure ventports are piped to a common vent connection.
Small, lightweight and economical, MAXPRO oxygen gas booster packages are ideal for aircraft and bottle filling applications. Requires only an air source for power (70 psi minimum) and an oxygen supply bottle that can be used to as low as 100 psi.These booster packages will achieve 1,800 psi or 2,000 psi outlet pressures. Single and double acting boosters are available to meet flow rate requirements
MAXPRO nitrogen gas booster packages offer an economical method of boosting nitrogen (or other select gases or air) gas pressure up to 4,400 psi. The package features a compact and lightweight arrangement that is turn-key and fully tested. No electrical power required, only a 75 psi shop air source is needed. Single and double acting boosters are available to meet flow rate requirements.
MAXPRO nitrogen gas booster packages offer an economical method of boosting nitrogen (or other select gases or air) gas pressure up to 4,400 psi. The package features a compact and lightweight arrangement that is turn-key and fully tested. No electrical power required, only a 75 psi shop air source is needed. Single and double acting boosters are available to meet flow rate requirements.
The Maximator® ROB rebreather oxygen booster is specifically designed for use in the sport diving field. This compact compressed air or hand driven oxygen booster provides a rugged and reliable means of recharging rebreather size tanks.
